Always Committed To
Making Better Machine
Mixers, Collectors, Feeders & Drinkers
English English 
Features：
1. The Mix Auger is CNC formed, the thickness is 12mm, and with a 8mm thickness wear -resistant plate is added to make the feed boiling flip, shorten the mix time and mix more evenly.
2.The cutting blade thickness is 8 mm, tungsten carbide.
3. Mix box side thickness is 8 mm, mix box floor thickness is 16 mm
4. The weighing system is sensitive and stable, and the display is clear.Brand:Avery Weigh-Tronix
The advantage of stationary feed mixers is that they are powered by electricity, enabling you to save fuel costs. In large farms where the feeding stations are spread over a large area, it can be advantageous to mix the feed in a central location and then to discharge it using a delivery truck. A stationary feed mixer can also be a great solution on small farms, e.g. if you want to dispense feed using a conveyor belt system or if there is no room on the feeding passage for a mixer wagon. We offer stationary feed mixers from 3 to 60 m³.
Its simplicity means any maintenance costs are minimal and the machine operates at high efficiency.
5. Remote control function and wear-resistant plate can be installed
Specification：
Model | Dimensoon L*W*H | Mix Auger | Cutting Blade | Motor Power | Weighing Sensors | Max Load | Mix Time (Minutes) | Warranty |
STMR-05 | 300*170*212 | 1 | 5 | 11 | 4 | 1500 | 20 | 1 Year |
STMR-07 | 316*189*238 | 1 | 6 | 15 | 4 | 2400 | 20 | 1 Year |
STMR-09 | 346*216*256 | 1 | 9 | 22 | 4 | 3000 | 20 | 1 Year |
STMR-12 | 380*216*280 | 1 | 9 | 37 | 4 | 4200 | 20 | 1 Year |
STMR-14 | 486*186*236 | 2 | 12 | 37 | 4 | 4800 | 20 | 1 Year |
STMR-16 | 560*216*245 | 2 | 18 | 55 | 4 | 5600 | 20 | 1 Year |
STMR-18 | 586*216*245 | 2 | 18 | 55 | 4 | 6300 | 20 | 1 Year |
STMR-20 | 600*216*255 | 2 | 18 | 75 | 4 | 7000 | 20 | 1 Year |
STMR-24 | 650*216*303 | 2 | 18 | 75 | 4 | 8400 | 20 | 1 Year |
| STMR-32 | 650*266*330 | 2 | 18 | 112 | 4 | 11200 | 20 | 1 Year |
STMR-36 | 900*245*286 | 3 | 30 | 132 | 4 | 12600 | 20 | 1 Year |
Tips：
Adding Feed order:
(1) Basic principles: according to the formula to follow the first dry after the wet, the first fine after the rough, the principle of light and heavy;
(2) Add order:
A. long grass (Leymus chinensis, wild hay, alfalfa, oat grass)
B. concentrate (raw grain, concentrated material, etc.)
C. Accessories (apple meal, cottonseed, wet beer distillers, etc.)
D. silage
E. Water or molasses
(3)In the mixing process should be noted that the charge can not be too full, leaving a certain amount of mixing cycle space.
Efficient mixing must be given to the chassis at least 20% free space for the feed cycle of mixing. To avoid the phenomenon of "arch bridge", that is, the feed is not recycled mixing, all take the deputy in the dragon, this will increase the load of the dragon, affecting the mixing effect.
